NordicTrack RW200 User Manual page 15

To return to the scan mode,
press the Priority Display but-
ton repeatedly until the word
SCAN appears in the center
display.
To reset the displays to zero, press the On/Reset
button.
Change the volume level of
the console by pressing the
Vol increase and decrease
buttons.
5. When you are finished exercising, the console
will turn off automatically.
If the row bar does not move for a few seconds, the
console will pause.
The console has an auto-off feature. If the row bar
does not move and the console buttons are not
pressed for a few minutes, the power will turn off
automatically to save the batteries.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your MP3 player,
CD player, or other personal audio player; make sure
that the audio cable is fully plugged in. Note: To
purchase an audio cable, see your local electronics
store.
Next, press the play button on your personal audio
player. Adjust the volume level using the Vol increase
and decrease buttons on the console or the volume
control on your personal audio player.
15