Charging The Battery - Hasselblad X2D 100C User Manual

29. Delete Button
30. Menu Button
31. Ambient Light Sensor
32. Rear Scroll Wheel
33. Battery
34. Battery Release Lever
35. Tripod Thread 1/4"
2 Using The X2D 100C

3 Charging the Battery

The X2D 100C comes with the battery already inserted in the battery slot. Remove the protective film on the battery and fully charge before using
for the first time.
1. Pull the battery release lever. The battery will pop out slightly. Press the battery gently until there is a click before removing the battery. Remove
the battery and the protective film.
2. Align the metal terminals of the battery with the terminals inside the camera grip and insert the battery.
3. Slide the connector slot lid toward the touch display to open. Connect the USB-C port of the camera with the included USB power adapter using
the USB-C to USB-C cable and connect the USB power adapter to a power outlet (100-220 V, 50-60 Hz).
It takes approximately two hours to fully charge the battery using the official Hasselblad USB power adapter.
It is recommended to use the included Hasselblad USB power adapter or the Hasselblad Battery Charging Hub to charge the battery.
Otherwise, use an FCC or CE certified 5V/3A USB power adapter.