Advertisement
Adjust the dosage and inject
7
Select your dosage.
If you turn past the
unit you should
inject, simply turn
back to the right
unit.
8
Inject your dosage as instructed by your
diabetes nurse or doctor. Insert the needle
into the skin and press the injection button
all the way down to the bottom. While you
inject, the dosage window counts down
to "0".
9
Hold the injection button in the
depressed position while
you count to 10. Then
pull the needle out.
After you have injected
10
10 sec.
Put on the outer needle cap and
unscrew the needle. Discard the
needle as instructed. Avoid needle
stick injuries by not using the inner
needle cap. Put on the protective
cap of your SoloStar and store
it safely.
CAUTION!
Always remove the needle after an
injection and store SoloStar without
the needle attached. This helps to
prevent contamination, air bubbles
and insulin leakage.
Advertisement
