Page 2
You can set dose levels of from 1 to 80 units in steps of 1 unit at a time. The quick guide contains information on how to use your SoloStar. You can find more detailed information in the instructions that come in the SoloStar packaging.
Page 3
SoloSTAR and its components Needle Injection button Inner needle cap Outer needle cap Dosage knob Dose window Pen cap Name and colour coding of the insulin Pen body Insulin The following needles are recommended for reservoir use with SoloStar: BD MicroFine+ (push and screw on)
Carry out a safety test prior to each injection Select a dose of Check that you have the correct insulin. 2 units by turning the dosage knob Lantus SoloStar is clockwise. Remove grey with a purple injection button. the outer and inner needle covers.
Page 5
"0". Always remove the needle after an injection to store the SoloStar without a needle. This helps to prevent contamination, air bubbles and insulin leakage. Keep holding the injection button in for a count of 10, then pull the needle out.
Page 8
Frågor om våra insulinpennor: You can find more information about diabetes at www.insulin.se You can also read about different insulins at www.fass.se sanofi-aventis AB, Box 14142, 167 14 Bromma, Tel: 08 - 634 50 00 www.sanofi-aventis.se Vid frågor om våra läkemedel kontakta: info@sanofi-aventis.com...