FOR-A IVS-200 Operation Manual page 46

(10) CORRECTION AREA
(11) MOTION DETECT
AREA
(12) TITLE PASTE
(13) DIRECT USE
(14) REMOTE CONTROL
(15) BYPASS/OPERATE
(16) OK
(17) MAIN MENU
Allows you to select a display size for the
shake-corrected image.
[Setting range] 0 to 15
[Default value] 0
Opens the MOTION DETECT AREA menu that
allows you to adjust the motion detection area.
Opens the TITLE PASTE menu that allows you to set
areas for titles to be excluded from the motion
detection area.
Allows you to select a parameter that can be directly
controlled by the menu control knob on the IVS-200
front panel.
[Setting range] OFF, CORR LEVEL, FILTER H,
FILTER V, FILTER R
[Default value] OFF
Allows you to select how STABILIZE can be turned
ON/OFF, and BYPASS/OPERATE can be switched
from operations on the front panel, via a web
browser, or via REMOTE interface. To use
Command control via LAN, select SERIAL.
[Setting range] FRONT, WEB, REMOTE, SERIAL
[Default value] FRONT
Allows you to switch between BYPASS and
OPERATE if REMOTE CONTROL is set to WEB.
Applies the setting to the IVS-200.
Returns to MAIN MENU.
46
5-4-3
8-3-4
8-3-5
5-4-6
5-4-7
6
－
8-3-1