Coordinate Conversion; Statistical Calculations - Canon F-715SG Instruction

Coordinate Conversion

With polar coordinates, you can calculate and display
within -180º <
Gradient)
After conversion, results will automatically assigned to
memory variables X and Y. (Example #17)

STATISTICAL CALCULATIONS

To enter the standard deviation mode by pressing
, [SD] indicator lights up. If press
enter the regression mode selection menu. [REG]
indicator will be turned on.
Before starting, be sure to clear the statistic memory by
pressing
Perform the data input (Precautions!).
• In SD mode, store the displayed data by pressing
pressing
• In REG mode, store the x-data and y-data in the form
of:
x-data
same data twice.
• Use
For example in SD mode, the data 20 has 8 times will
press 20
• Press
the data value (x) and data frequency (Freq). Follow
with the above example, press
and press
• To edit the stored data, input the new value during the
display of that data value (x) after pressing
and then press
press
stored.
180º range. (Same as Radian and
will input the same data twice.
y-data
for same data multiple entries.
8
or key during or after data input can display
will display [Freq1= 8].
to confirm the edit. But, if you
instead of
.
, pressing
.
, a new data value will be
16
[SD] [REG]
, you can
will input the
will display [x1 = 20],
,
or key,