Error Message And Error Locator - Canon F-715SG Instruction

Error Messages and Error Locator
The calculator is locked up while an error message is
shown on the display to indicate the cause of the error.
Press
memory and return to initial display of the latest mode.
Press
the display of the latest mode.
Press
cursor positioned under the error and you can correct
it accordingly.
Error Message
Math
ERROR
Stack
ERROR
Syntax
ERROR
will clear the error, remove all replay
will clear the error message and return to
or to display the calculation with the
Cause
• Calculation result is
outside the allowable
calculation range
• An attempt to perform
a calculation using a
value that exceeds the
allowable input range.
• An attempt to perform
an illogical operation
(division by zero, etc.)
The capacity of the
numeric stack or
operator stack is
exceeded.
An attempt to perform
an illegal mathematical
operation.
Check your input
values and make
sure they are all
within the allowable
ranges. Pay special
attention to values in
any memory areas
you are using.
Simplify the
calculation. The
numeric stack has 10
levels and the
operator stack has
24 levels.
Divide your
calculation into two
or more separate
parts.
Press
display the
calculation with the
cursor located at the
location of the error
and make required
corrections.
10
Action
or to