Table of Contents
Advertisement
User
Manual
of
You can click the
II. To schedule an all-day recording, check the checkbox after the All Day item.
III. To arrange other schedule, leave the All Day checkbox blank and set the Start/End time.
Up to 8 periods can be configured for each day. And the time periods can't be overlapped each
other.
IV. Select the record type in the dropdown list.
To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video
Content Analysis) triggered recording and capture, you must configure the motion detection settings,
alarm input settings or VCA settings as well. For detailed information, refer to Chapter 8.1, Chapter
8.2 and Chapter 8.5.
The VCA settings are only available to the smart IP cameras.
Repeat the above edit schedule steps to schedule recording or capture for other days in the week. If the
schedule can also be applied to other days, click Copy.
Network
Video
Figure 5. 7 Recording Schedule Interface
button to set the accurate time of the schedule.
Figure 5. 8
Edit Schedule
59
RecorderKVR-p16Px16
&
KVR-p32Px16
Advertisement
Table of Contents
