Table of Contents
Advertisement
User
Manual
of
2) You can edit the IP address, protocol, management port, and other information of the IP camera to be
added.
3) Click Add to add the camera.
OPTION 2:
Steps:
1. Enter the Camera Management interface.
Menu> Camera> Camera
1.
Repeat the step 3 and 4 of OPTION 1 to add the camera.
Icon
Explanation
Edit basic parameters of the camera
The camera is connected; you can
click the icon to get the live view of
the camera.
Delete the IP camera
2.
(For the encoders with multiple channels only) check the
shown in the following figure, and click OK to finish adding.
Network
Video
Figure 2. 13 Main Menu
Figure 2. 14 IP Camera Management Interface
Table 2. 2 Explanation of the icons
RecorderKVR-p16Px16
Icon
Explanation
Add the detected IP camera.
The camera is disconnected; you can
click the icon to get the exception
information of camera.
Advanced settings of the camera.
of Channel No. in the pop-up window, as
checkbox
27
&
KVR-p32Px16
Advertisement
Table of Contents
