Table of Contents
Advertisement
User
Manual
of
Note:
must start with the lower-case English letter and cannot end with '-'.
IF THE WAN PORT USED FOR HTTP ACCESS IS OTHER THAN 80, IT IS
ESSENTIAL THAT YOU ENTER THE ACTUAL WAN HTTP PORT INTO THE
REGISTRATION DATA.
Access the Device via Web Browser or Client Software
After having successfully registered the device on the SIMPLEDDNS server, you can access
your device via web browser or Client Software with the Device Domain Name (Device
Name).
Task 1: Access the Device via Web Browser
Open a web browser, and enter
refers to the Device Domain Name on the device or the Device Name on the SIMPLEDDNS
server.
Example: http://www.simpleddns.com/nvr
Note:
than 80, (Refer to Chapter 9.2.10 for the mapped HTTP port number) you must enter the
mapped port info into the SIMPLEDDNS setup for the NVR so that port information is
included when you are redirected from SIMPLEDDNS.COM/alias to your NVR.
OPTION 2: Access the devices via CMS
For CMS, in the Add Device window, select
Nickname: Edit a name for the device as you want.
Server Address: www.simpleddns.com
Device Domain Name: It refers to the Device Domain Name on the device or the Device Name
on the SIMPLEDDNS server you created.
User Name: Enter the user name of the device. By default it is admin.
Password: Enter the password of the device. By default it is 12345.
Network
Video
Figure 9. 10 Register the Device
The device name can only contain the lower-case English letter, numeric and '-'; and it
http://www.simpleddns.com/alias
If you mapped the HTTP port on your router and changed it to a port number other
RecorderKVR-p16Px16
and then edit the device information.
142
&
KVR-p32Px16
in the address bar. Alias
Advertisement
Table of Contents
