Table of Contents
Advertisement
Minimum speed: for silent operation.
Medium speed: reduces noise levels while main-
taining a comfortable temperature.
Maximum speed: to achieve the target tempera-
ture as rapidly as possible.
the appliance automatically selects the
most suitable fan speed in relation to the temperature set on the
digital display and current room temperature.
The most suitable indoor temperature for the room during the
summer varies from 75°F to 81°F (24 to 27°C). You are recom-
mended, however, not to set a temperature much below the out-
door temperature.
WHISPER COOL (available in conditioning mode only)
By activating this function, the operating noise is further re-
duced. To activate it, touch the
The display shows the relative symbol (C16).
DEHUMIDIFYING MODE
Ideal to reduce room humidity (spring and autumn, damp
rooms, rainy periods, etc). In dehumidifying mode, the appli-
ance MUST be set-up in the same way as for air conditioning,
with the air exhaust hose (B2) attached to enable the moisture
to be discharged outside. To set this mode:
• Touch repeatedly the MODE button until the dehumidify-
ing symbol is displayed.
FAN MODE
When using the appliance in this mode, the air exhaust hose
(B2) does not need to be connected.
To set this mode:
• Touch repeatedly the MODE button until the fan symbol is
displayed.
• Select the fan speed by pressing the
You can choose:
Minimum speed: for silent operation.
(C7) button.
button (C6).
Medium speed: reduces noise levels but still main-
tains a good fan power.
Maximum speed: for maximum fan power.
CHANGING TEMPERATURE SCALE
The temperature can be displayed in °F or °C. To change the tem-
perature scale, turn off the unit by touching the
keep touched the MODE button for approximately 20 seconds.
The appliance emits a beep to confirm.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown.
This avoids wasting electricity by not operating the appliance
when it is not needed.
How to program delayed start up
•
Plug the appliance into an electrical receptacle and turn the
unit to standby.
•
Touch the timer button (C3): the timer symbol (C13) and
the number of hours come on.
•
Use the + (C4) or - (C5) buttons to set the number of hours
delay before the appliance comes on.
•
The appliance works using the mode previously set.
The appliance can be set to come on within the next 24
hours.
•
A few second after set, the setting is memorised, the timer
symbol is lit and the display shows that the appliance is in
standby.
To delete the setting, touch two times the timer button (C3). The
timer symbol (C13) switches off.
How to program delayed shutdown
•
With the air conditioning on, in every mode, it is possible to
set the delayed shutdown.
•
Touch the Timer (C3) button: the timer symbol (C13) and
the hours switch on.
•
Use the + (C4) or - (C5) buttons to set the number of hours
delay before the appliance turns off.
A few second after set, the setting is memorised, the timer sym-
bol is lit and the display shows the current mode.
At the end of the set time the appliance automatically turns in
standby mode. To delet ethe setting, touch two times the timer
button (C3). The timer symbol (C13) switches off.
9
button, then
Hide quick links:
Advertisement
Table of Contents
