safety Read these instructions carefully and retain for future reference. Remove all packaging and any labels. Always ensure bones and rind etc are removed from the meat before mincing. When mincing nuts only feed a few down at a time and allow the scroll to pick them up before adding any more.
Keep the appliance and its cord out of reach of children. Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.
to assemble the meat When selecting reverse, always wait until the appliance stops operating grinder before turning the ON/OFF switch to the reverse (R) position. 1 Fit the scroll inside the meat 6 Switch off and unplug after use. grinder. 7 Loosen the ring nut.
pork sausage recipe stuffed kebbe recipe 100g (4oz) dry bread outer casing ⁄ 600g (1 lb) pork, lean and fat, cut 500g (1lb 2oz) lamb or fat-free into strips mutton, cut into strips 1 egg, beaten 500g (1lb 2oz) bulgur wheat, 5ml (1tsp) mixed herbs washed and drained salt and pepper...
If the cord is damaged it must, for Season as required safety reasons, be replaced by 1 Mix the minced beef, onion and Kenwood or an authorised Kenwood seasoning together in a bowl. repairer. 2 Divide the mix into 4 and then add...
Designed and engineered by Kenwood in the UK. Made in China. IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste.
troubleshooting guide Problem Cause Solution Meat grinder does not No power. Check meat grinder is operate. plugged in. Check the fuse/circuit breaker in your home. If none of the above see “service and customer care” section. Meat Grinder stops or Stalls due to food Switch off and turn the slows during operation.