1. Manuals
  2. Brands
  3. KT&C Manuals
  4. IP Camera
  5. KPT-SPDN120HD
  6. User manual

KT&C KPT-SPDN120HD User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Issue: 1.1
User's Manual
Model: KPT-SPDN120HD
1
30X Mini PTZ

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KPT-SPDN120HD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for KT&C KPT-SPDN120HD

Summary of Contents for KT&C KPT-SPDN120HD

  • Page 1 Issue: 1.1 User’s Manual Model: KPT-SPDN120HD 30X Mini PTZ...
  • Page 2 Issue: 1.1 REVISED HISTORY DATE ISSUE CONTENTS OF CHANGES S/W VERSION 2011/05/25 Issue 1.0 Initial draft 30X Mini PTZ...

  • Page 3: Table Of Contents

    Issue: 1.1 Contents Warnings and Cautions ............................4 FCC Compliance statement ............................7 CE Compliance statement ............................7 1. Overview ................................8 1.1 Features ................................8 1.2 System Configuration ............................9 1.3 Termination Settings ............................9 2. Installation and Connection ..........................9 2.1 Package Contents.............................9 2.2 Base Installation ..............................10 2.3 Connection Interface and Wiring cables ......................11 2.4 Setting Dome Camera ............................13 3.

  • Page 4: Warnings And Cautions

    Issue: 1.1 Warning and Caution If you fail to read this information and handle the product incorrectly, death or serious injury may occur. *Precaution Safety ----------------------------------------------------------------------------------------------------------------- Should any liquid or soil object fall into the dome, unplug the dome and have it checked by the qualified personnel before operating it any further.

  • Page 5: Important Safeguards

    Issue: 1.1 Important Safeguards Read this manual carefully. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this dome near water or much moisture. Clean only with dry cloth. Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  • Page 6: Fcc Compliance Statement

    Issue: 1.1 This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance FCC Compliance statement------------------------------------------------------------------------------------------ This Equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part...

  • Page 7: Overview

    Issue: 1.1 1. Overview 1.1 Feature The PTZ Dome shall be quickly to install and be able to offer the services described in this document by way of an interface unit. Its mechanical architecture is designed to ensure adequate mechanical attachment to the wall of a dwelling. Details shall be provided as to how the PTZ Dome is to be installed.

  • Page 8: System Configuration

    Issue: 1.1 1.2 System Configuration Video Video Video Video Video Video Video Video Video Video Video Video 1.3 Termination Settings [SW303: Refer to 2.4 Dome Camera Settings] To prevent mal-function or the attenuation of communication signals between the camera and controller, the items (marked with gray color) at the end of line must be set up with the termination settings.

  • Page 9: Installation And Connection

    Issue: 1.1 2. Installation and Connection 2.1 Package Contents 30X Mini PTZ...

  • Page 10: Base Installation

    Issue: 1.1 2.2 Base Installation - Make holes for mounting and cable hole in the ceiling place to which the dome camera is installed using the template sheet. - Extract the cable through the (cable) hole and connect the connector of terminal block .in the dome - Fix the dome base firmly with supplied mounting screws (4) - Lock the housing cover with torx screws (4) 30X Mini PTZ...

  • Page 11: Connection Interface And Wiring Cables

    Issue: 1.1 2.3 Connection Interface and Wiring cables *Caution Do not connect the power cable until all other connections have been completed. After removing the protection sheet (PE form), supply the power to the dome camera. 2.3.1 Connecting the RS-485 lines The dome camera can be controlled remotely by an external device or control system such as a controller using RS-485 half duplexer (RS-485 Connection).
  • Page 12 Issue: 1.1 To prevent wrong operation and malfunction, each dome camera has a unique address (ID). The default setting is 0[ID001]. Dome Camera ID Setting (Rotary Switch, SW301, SW302) SW301 SW302 2.4.2 Setting the protocol of dome camera Analog Composite Video (Dip Switch, SW303) Baud Rate(bps) NTSC Dome Camera Protocol Setting (Dip Switch, SW303)

  • Page 13: Program And Operation

    Issue: 1.1 3. Program and Operation [OSD Menu Structure] Main Menu/Title Operation Menu -Next Page Continue- 30X Mini PTZ...
  • Page 14 Issue: 1.1 -Next Page Continue- 30X Mini PTZ...

  • Page 15: Getting Started

    Issue: 1.1 This manual is designed to be a reference for the programming and operation of the system. You can see information about features of the dome and commands as well as an operation method. The symbols below mean some action of the joystick controller. ▲/▼: move joystick up and down ◀/▶: move joystick left and right direction ▶: select or change settings...

  • Page 16: Main Menu

    Issue: 1.1 Preset} is saved at ‘Sub Menu’, {the status of Preset Setup} has to be saved at ‘Preset Setup Menu’ again. *Notice: To stop an action, press [ESC] button or [96+Preset]. In that case, the dome goes to manual mode or is to be paused temporarily (about 10sec in Alarm mode) 3.1.1 Accessing to MAIN MENU [95] + [Preset]/ [Menu]* When you use Pelco-D and Pelco-P protocol with your controller, you can access to the main menu on your...

  • Page 17: System Setup Menu

    Issue: 1.1 ▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu. (Back to previous menu without saving) 3.3 System Setup Menu ▲/▼: move joystick up and down for selecting an item. ◀/▶: move joystick left and right for moving an item. ▶/ [Open]/ [Near]: move joystick right to select, save settings or go to the edit page.
  • Page 18 Issue: 1.1 - Enter into {Main Menu} - Select {System) using joystick and move to {Reboot} in the sub menu of {System} - To {Reboot} the system, Press [Near] key. - To cancel Reboot, Press [Far] key. 3.3.3 Initialize Use this function to initialize all or specific parameters of dome to factory default parameters. - Enter into {Main Menu} - Select {System} using joystick [ ] and move to {Initialize} in the sub menu of {System}...

  • Page 19: Display Setup Menu

    Issue: 1.1 programming. The valid password with four characters must be entered to continue programming. - Enter into {Main Menu} (refer to Accessing Main Menu) - Select {System} and move to {Password} in the sub menu of {System} using joystick [ ▶...
  • Page 20 Issue: 1.1 You can see only video or some character with video. Each element is able to handle. OSD setup allows you to program how labels are displayed on the monitor. Labels are such as Title, Dwell Time, Zoom ratio, Camera ID, Operation Mode and PTZ Angle Label position can be set where you want to place on the monitor.

  • Page 21: Camera Setup Menu

    Issue: 1.1 - It is possible to clear saved zone No.xx individually. - Press [Open] button or use joystick to save settings. - Press [Close] button or use joystick to return to previous menu (Back). 3.4.4 Image Setup This menu is for changing displayed image settings. - Enter into {Main Menu} - Select {Display} and move to {Image Setup} using joystick [ ▶...
  • Page 22 Issue: 1.1 ▲/▼: move joystick up and down for selecting an item. ◀/▶: move joystick left and right for moving an item. ▶/ [Open]/ [Near]: move joystick right to select or save settings or go to edit pages. ▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back). 3.5.1 Focus/Zoom Auto Focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions automatically.
  • Page 23 Issue: 1.1 This feature automatically processes the viewed image to retain color balance over a color temperature range. The default setting for auto white balance is Auto mode. In Manual mode, you can change the R or B gain value to adjust the color on a monitor. *Auto Trace White balance (ATW): It aligns the white balance automatically.
  • Page 24 Issue: 1.1 Shutter O (Auto) O (Auto) (Auto, X2~X64,1/30~1/10000) AGC Gain(OFF, Low/Mid/High) O (High) DSS(OFF, X2~X64) O (Off) Bright(0~100) O (50) O(050) O (50) 3.5.4 Day & Night Setup The Day & Night function improves the camera’s sensitivity at night or when the brightness level of the ambient environment.

  • Page 25: Dome Motion Menu

    Issue: 1.1 - Enter into {Main Manu} - Select {Camera Setup} and move to {Advanced Setup} using joystick [ ▶ - Set sharpness level and brightness and DIS on/off - Press [Open] button or use joystick to save settings. - Press [Close] button or use joystick to return to previous menu (Back). When both high-brightness subjects and low-brightness subjects have been shot at the same time, overexposure in the high-brightness subjects or loss of dark detail in the low-brightness subjects may occur.
  • Page 26 Issue: 1.1 This menu control general function of dome. Power-up Action is a function (preset, tour, pattern and scan) to be performed when the power is re-cycled or after alarm action. The following settings are available. Set the dome ‘On’ (default) to resume its prior activity. - Use the joystick [ ] to select On/Off ▶...
  • Page 27 Issue: 1.1 Home Action can be set so that the dome automatically goes to a preset, a tour or auto scan after the joystick control has been idle for some amount of time. The dwell time can be set from 1 minute to 60 minutes. - Using the joystick [ ], {Home Action} can be selected to Home (default), Preset, Scan and Tour.

  • Page 28: Preset Menu

    Issue: 1.1 {Calibration}. Press [Near] button to continue calibration or press [Far] button to cancel calibration. In Auto mode, when there is an error on the angle of the dome, the dome is corrected automatically. The motor of the Pan/Tilt will adjust its angle automatically. {Error Message Display} is a function for displaying an error message to let a user know {Sensing error} on the monitor.

  • Page 29: Tour Menu

    Issue: 1.1 ▲/▼: move joystick up and down for selecting an item. ◀/▶: move joystick left and right for moving an item. ▶/ [Open]/ [Near]: move joystick right to select or save settings or go to edit pages. ▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back). A {Pattern} is to display (or recall) a memorized, repeated and serial trace of pan, tilt, zoom.

  • Page 30: Auto Scan Menu

    Issue: 1.1 ▲/▼: move joystick up and down for selecting an item. ◀/▶: move joystick left and right for moving an item. ▶/ [Open]/ [Near]: move joystick right to select or save settings or go to edit pages. ▶/ [Close]/ [Far]: move joystick to cancel or to exit current menu (Back). The dome can have 8 {Group Tours}.

  • Page 31: Alarm Menu

    Issue: 1.1 An {Auto scan} is a PTZ function that can be moved from one position to another position. The dome has maximum 8 {Auto Scan} and {Scan Speed} can be changed from 1 to 35 degree/sec. Use the following steps to program a {Auto Scan}. - Enter into {Main Manu} - Select {Auto Scan} and move left or right to select {Auto Scan} Number.
  • Page 32 Issue: 1.1 - Change an action/number {Off, Preset, Pattern, Scan, or Tour}. - Set Alarm action time (Dwell Time): 3~60sec/On, default setting is ‘ON’. -> Time Out (3~60sec): This is activated during a period of a selected dwell time when an alarm is triggered. ->...

  • Page 33: Troubleshooting

    Issue: 1.1 4. Troubleshooting Guide If problems occur, check the installation of the dome with the instructions in this manual. And refer to this manual for further information. Problem Solution Verify that power is connected to all components in the system.

  • Page 34: Specifications

    Issue: 1.1 5. Specifications 5.1 General Specifications Model 12X Mini Speed Dome Image Device 1/3" CMOS Effective Pixels About 2.1Mega Pixel HD: 1920*1080 (Full HD,1080P@30fps), 1280*720(HD, 720P@60fps) Video Signal SD: NTSC, PAL Lens 12X Optical /10X Digital Zoom(Auto Focus) View Angle Approx. Approx.52.4°...

  • Page 35: Dimensions

    Issue: 1.1 5.2 Dimensions [Unit: mm] 30X Mini PTZ...

  • Page 36: Appendix. Pelco Protocol Function List

    Issue: 1.1 APPENDIX. Pelco Protocol function List Based on WTX1200A Function Preset No. Operation e.g. 1 e.g. 2 1~59, PRESET Preset No.+Preset 1+Preset 101~250 1~59, Preset shortcut saving *Preset 101~250 Run FLIP Preset No.+Preset 33+Preset Run PAN ZERO Preset No.+Preset 34+Preset Scan Setup Preset...

Table of Contents