Page 4
Technical data Cordless drill/screwdriver TDK 12 TDK 15.6 Motor voltage 12 V 15.6 V Idle-running speed 1. Speed 0 - 430 rpm 0 - 450 rpm 2. Speed 0 - 1400 rpm 0 - 1500 rpm Max torque Soft boring (wood)
Page 5
Wall mounting LC 45 Changing tools The charger LC 45 has two longitudinal slots on - Turn the clamping sleeve (2.2) anti-clockwise its rear by which it can be suspended on walls to open the clamping jaws (2.1) (Note: the using two screws (e.g.
Page 6
Do not use spent and recycled battery packs. in reverse to remove the battery pack from the The user shall be liable for damages if Festool charger. The battery type used (NiCd or NiMH) original battery packs are not used.
Page 7
Note Return spent or defective battery packs to dea- We reserve the right to make changes to the lers, the Festool after-sales service department technical data contained in this information as or approved waste disposal facilities. This ensu- a result of ongoing research and development res that they are correctly recycled.
Page 8
Manager Research and Development ja normatiivisten ohjeiden mukainen: EN 60 745, Directeur de recherce et développement EN 55 014, EN 61 000 direktiivien 98/37/EY, 89/336/EY Festool GmbH määräysten mukaan. Wertstr. 20 D-73240 Wendlingen Dr. Johannes Steimel EF-konformitetserklæring: Vi erklærer at have alene...
Need help?
Do you have a question about the TDK 12 and is the answer not in the manual?
Questions and answers