Factory Default Setting - Miele G1574 Operating Instructions Manual

Factory default setting

If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings as
follows:
^ Open the door.
^ Switch the dishwasher off with the Off
button V.
^ Press the programme selector button
in, and whilst holding it in switch
the dishwasher on using the On
button U .
Keep the programme selector button
pressed in until the lower right hand
programme indicator comes on.
If this does not happen, start the
procedure from the beginning again.
^ Press the Turbo/Tab button twelve
times.
The Tab indicator light will give one
long flash and two brief flashes at
intervals.
Additional functions
The flashing sequence in the Time
display shows whether a setting other
than the factory default setting has
been set.
– "p 1": All settings are set to factory
default settings.
– "p 0": At least one setting has been
changed.
^ To reset to the factory default
settings, press the programme
selector button.
The setting is now stored in memory.
^ Switch the dishwasher off with the Off
button V.
43