Information And Explanation Of Symbols - Unitron Remote control 2 Manual

Information and explanation of symbols

With the CE symbol, Unitron confirms that this
Unitron product, including accessories, meets the
xxxx
requirements of the Medical Devices Directive 93/42/
EEC as well as the R&TTE Directive 1999/5/EC on radio
and telecommunications transmitters. The numbers
after the CE symbol correspond to the code of certified
institutions that were consulted under the above-
mentioned directives.
This symbol indicates that it is important for the user to
read and take into account the relevant information in
this user guide.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and product safety.
Australian EMC and Radiocommunications compliance
label.
This symbol indicates that the products described in
these user instructions adhere to the requirements for
an application part of Type B of EN 60601-1. The surface
of the hearing aid is specified as applicated part of
Type B.
This symbol shall be accompanied by the name and
the address of the authorised representative in the
European Community.
20