Starting Up The Boiler; Info Menu - Radiant RSA 32/25 User Manual

3. Starting up the boiler

Check that the boiler is power supplied and that the gas feed valve, placed at the bottom of the boiler, is
•
open.
Switch on the boiler by using MODE SELECTION
•
required.

4. INFO Menu

Press the ' ' INFO Button to display the boiler data.
Once pressed, the parameter number will appear on the left side of the display and the associated
parameter value will appear on the centre of the display. Use '
Temperature setting to scroll the list of available data.
Press the ' ' INFO button to exit the display mode.
The list of available display data is the following:
Parameter
d00
d01
d02
d03
USER INSTRUCTIONS
D.H.W temperature sensor
Outdoor temperature sensor
Kd Thermoregulation value
Low temperature circuit sensor (only with Zone PCB connected)
BUTTON and select the functioning mode
' and '
Description
3
' buttons of Heating