Free Arm; Leveling The Machine Base Plate; Thread Cutter - Pfaff Smarter Owner's Manual

Pack away after Sewing
Note: After switching off, residual power may still
remain in the machine. This may cause the light
to stay on for a few seconds while the power is
consumed. This is normal behavior for an energy
2. Unplug the cord from the wall socket and
then from the machine.
3. Unplug the foot control cord from the
machine. Wind the cord around the foot
control for easy storage.
4. Place all accessories in the accessory tray.

free arm.

5. Place the foot control in the space above
the free arm.
6. Put on the hard cover.
Free Arm
To use the free arm, slide off the accessory
tray. When attached, a hook keeps the acces-
sory tray securely attached to the machine.
Remove the tray by sliding it to the left.

Leveling the Machine Base Plate

To make sure your machine stands steadily on
your sewing surface you can adjust the base
plate height.
hand. Turn clockwise to lower and counter-
clockwise to raise the base plate.

Thread Cutter

To use the thread cutter, pull the thread from
12
A
B