Sony HT-CT380 Service Manual page 25

2-14. User Update Mode
(It is displayed "UPDATE" on the fl uorescent indicator tube)
Not used for the servicing.
Press the [ ] button if having entered this mode.
?/1
2-15. SW Distance Test Mode
(It is displayed "SW.DIST" on the fl uorescent indicator tube)
Not used for the servicing.
Press the [ ] button if having entered this mode.
?/1
2-16. HDCP Key Read Mode
(It is displayed "HDCP" on the fl uorescent indicator tube)
Not used for the servicing.
Press the [ ] button if having entered this mode.
?/1
2-17. NFC Test Mode
(It is displayed "NFC.TST" on the fl uorescent indicator tube)
Not used for the servicing.
Press the [ ] button if having entered this mode.
?/1
2-18. Auto Standby Test Mode
(It is displayed "T. STBY" on the fl uorescent indicator tube)
Not used for the servicing.
Press the [ ] button if having entered this mode.
?/1
2-19. Wireless Sound Test Mode
It can display the -com version of Subwoofer (SA-WCT380/
WCT381).
be displayed on the fl uorescent indica-
Note : More than one item may
tor tube
, but it is not used for the servicing other than "VER.CHE".
Preparation:
• Prepare the remote commander (RMT-AH101U) attached to
this unit.
• Connect the Bar Speaker (SA-CT380/CT381) and the Sub-
woofer (SA-WCT380/WCT381) by wireless.
Procedure:
1. Enter the test mode menu.
(Refer to "Setting method of the test mode menu" on page 22)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
"WS TST", press the [INPUT] button.
3. The message "FACTRY" is displayed on the fl uorescent indi-
cator tube and enter the wireless sound test mode.
4. Press the [ ]/[ ] buttons on the remote commander, select the
V v
"VER.CHE", and press the [ENTER] button on the remote
commander.
5. The -com version of Subwoofer (SA-WCT380/WCT381) is
displayed on the fl uorescent indicator tube.
(Displayed values in the above fi gure are example)
6. When [ ]/[ ] buttons on the remote commander is pressed
V v
while the -com version of Subwoofer (SA-WCT380/
WCT381) is displayed on the fl uorescent indicator tube, year,
month and day of the creation is displayed on the fl uorescent
indicator tube.
(Displayed values in the above fi gure are example)
When [ ]/[ ] buttons on the remote commander is pressed
V v
again, the display returns to the -com version of Subwoofer
(SA-WCT380/WCT381) display.
Releasing method:
Press the [ ] button to release the test mode menu.
?/1
2-20. Wireless Sound Cold Reset
It can initialize various backup information of Subwoofer (SA-
WCT380/WCT381).
Preparation:
Connect the Bar Speaker (SA-CT380/CT381) and the Subwoofer
(SA-WCT380/WCT381) by wireless.
Procedure:
1. Enter the test mode menu.
(Refer to "Setting method of the test mode menu" on page 22)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
"WS RST", press the [INPUT] button.
3. The on/standby indicator on the Subwoofer (SA-WCT380/WCT381)
turns red and fl ashes, then turns on yellow.
on/standby indicator
Red (flash)
t
4. Pull out the power cord on the Subwoofer (SA-WCT380/WCT381)
from an outlet and insert the power cord again.
HT-CT380/CT381
Yellow (light up)
25