Controls - Daewoo KOG-361Q Service Manual

CONTROLS

SETTING THE CLOCK
When the oven is first plugged in, the display will flash " : 0" and a tone will sound. If the AC power
ever goes off, the display will flash " : 0" when the power comes back on.
DO THIS
CLOCK/
A.START
1. Touch CLOCK/
A.START pad.
CLOCK/
A.START
2. Touch CLOCK/
A.START pad once
more.
1 2 3 0
3. Enter the correct time of
day by touching the num-
bers in sequence.
CLOCK/
A.START
4. Touch CLOCK/
A.START pad.
NOTE : If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the CLOCK/A.START pad re-enter the time.
THIS HAPPENS...
The display stop blinking and the colon starts blinking.
If you selected 12 hour clock system this digital clock allows you to set
from 1:00 to 12:59.
If you selected 24 hour clock system, this digital clock allows you to
set from 0:00 to 23:59
This is a 12 hour clock system.
This is a 24 hour clock system.
NOTE : This oven is multiple
clock system. If you
want 12 hour clock
system, can be
omitted this step.
The display will then begin blink-
ing.
7