Operation Procedure - Daewoo KOG-361Q Service Manual

OPERATION PROCEDURE

This section includes useful information about oven operation.
1. Plug power supply cord into a 230V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1 When the oven door is opened, the light
turns off.
2 The oven door can be opened at any time
during operation by touching the door
release button on the control panel. The
oven will automatically shut off. To restart
the oven. close the door and then touch
START.
3 Each time a pad is touched, a BEEP will
sound to acknowledge the touch.
4 The oven automatically cook on full power
unless set to a lower power level.
5 The display will show " : 0" when the oven
is plugged in.
Wattage output chart
The power-level is set by pressing the POWER pad. The chart shows the display, the power level and
the percentage of power.
Touch Power pad,
Once the touch
POWER
9
8
7
6
5
4
3
2
1
0
6
6 Time clock returns to the present time
when the cooking time ends.
7 When the STOP/CLEAR pad is touched
during the oven operation, the oven stops
cooking and all information retained. To
erase all information retained. To erase all
information (except the present time),
touch the STOP/CLEAR pad once more. lf
the oven door is opened during the oven
operation, all information is retained.
8 If the START pad is touched and the oven
does not operate, check the area between
the door and door is closed securely. The
oven will not start cooking until the door is
completely closed or the program has
been reset.
Make sure the oven is properly installed
and plugged into the electrical outlet.
Power Level (Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P- 0
Approximate Percentage
of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%