Software Support Information; Power Management And Consumption; Table D-2. Monitor Powerm - Compaq Evo D500 Technical Reference Manual

Hide thumbs Also See for Evo D500:
Table of Contents

Advertisement

Appendix D Compaq/NVIDIA TNT2 Pro AGP Graphics Card
D.4

SOFTWARE SUPPORT INFORMATION

The NVIDIA TNT2 Pro graphics card is fully compatible with software written for legacy video
modes (VGA, EGA, CGA) and needs no driver support for those modes.
Drivers are provided with or available for the card to provide extended mode support for the
current operating systems and programming environments such as:
♦ Windows 98, 95
♦ Windows NT 4.0, 3.51
♦ Windows 3.11, 3.1
♦ OS/2
♦ Quick Draw
♦ MS Direct Draw and Direct X
♦ Direct 3D
♦ OpenGL
D.5

POWER MANAGEMENT AND CONSUMPTION

This controller provides monitor power control for monitors that conform to the VESA display
power management signaling (DPMS) protocol. This protocol defines different power
consumption conditions and uses the HSYNC and VSYNC signals to select a monitor's power
condition. Table I-2 lists the monitor power conditions.
Table D-2. Monitor Power Management Conditions
HSYNC
VSYNC
Active
Active
Active
Inactive
Inactive
Inactive
The graphics card's maximum power consumption on the AGP bus is listed below:
Maximum current draw @ 3.3 VDC: 3.0 A
Maximum current draw @ 5.0 VDC: 50 mA
Maximum current draw @ 1.5 VDC: 10 mA
Maximum power consumption: 10.2 watts
D-4
Compaq Personal Computers
Table D-2.
Monitor Power Management Conditions
Power Mode
Description
On
Monitor is completely powered up. If activated, the inactivity
counter counts down during system inactivity and if allowed to
tiemout, generates an SMI to initiate the Suspend mode.
Suspend
Monitor's high voltage section is turned off and CRT heater
(filament) voltage is reduced from 6.6 to 4.4 VDC. The Off mode
inactivity timer counts down from the preset value and if allowed
to timeout, another SMI is generated and serviced, resulting in
the monitor being placed into the Off mode. Wake up from
Suspend mode is typically a few seconds.
Off
Monitor's high voltage section and heater circuitry is turned off.
Wake up from Off mode is a little longer than from Suspend.
Original - July 2000

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Deskpro workstationap230Deskpro en

Table of Contents