Lindy 25030 User Manual page 8

After the Switch finishes the self-diagnostic, open your computer's web browser and
at the "Address:" field, enter the Switch's IP address (e.g. http://192.168.1.1), hit
"Enter" or click on "Go", and the Switch's configuration page will prompt you to enter
"User Name" and "Password" to login.
NOTE: default User Name: admin, Password: lindy
Modify Network Adapter's IP address
You can change the network adapter's IP address in the Network Adapter's
"Properties". We suggest that you change the network adapter's IP to the following
settings:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Note: you don't need to enter Gateway address at the moment.
Reboot the computer if necessary. After the computer boots back up, open the web
browser and at the "Address" field, enter http://192.168.1.1, hit "Enter" or click on
"Go", and the Switch's configuration page will prompt you to enter "User Name" and
Password" to login.
NOTE: default User Name: admin, Password: lindy.
- 7 -