Save These Instructions Before you plug in your Fuller Brush vacuum cleaner, make sure the voltage indicated on the rating plate located on the back of the vacuum cleaner is the same as your local supply�...
ImpoRTanT SafeTy InSTRuCTIonS Read all InSTRuCTIonS befoRe uSIng ThIS applIanCe. When using an electrical appliance, basic precautions should always be followed, including the following: Save TheSe InSTRuCTIonS. WaRnIng: To reduce the risk of fire, electric shock or injury: 1� Do not leave appliance unattended when plugged in� Unplug from outlet when not in use and before servicing� 2�...
Two-Wire polarized Cord This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other)� This plug will fit into the power outlet only one way� This is a safety feature� If you are unable to insert the plug fully into the outlet, try reversing the plug�...
Self-adjusting nozzle Thermal reset button Replacement bags and filters • Genuine Fuller Brush HEPA Filter • Genuine Fuller Brush Vacuum Bags Part number 06.288 Part number 06.181 6 per package • Genuine Fuller Brush Secondary Filter Part number 06.250...
how to assemble and operate the vacuum how to attach the handle to the vacuum Cleaner The vacuum and the handle are packed separately� 1� After first removing the handle screw, slide the handle into the slots on top of the vacuum cleaner� (Fig� 1) 2�...
handle adjustments The handle on this vacuum cleaner can be set to one of three positions – upright, middle or low� how to adjust the handle 1� To release the handle, step on the foot pedal on the back left side of the vacuum cleaner nozzle and pull back the handle (Fig�1)�...
Self-adjusting Rug nozzle Your Fuller Brush upright vacuum cleaner is designed with an Automatic Self-Adjusting Rug Nozzle� No manual adjust- ments are required� The height of the rug nozzle is instantly and automatically adjusted to carpet pile height� This self- adjusting feature allows the rug nozzle to float evenly over all carpet pile surfaces�...
how to Replace the headlight bulb and the vacuum belt CauTIon: First, unplug the vacuum cleaner� how to Remove the bottom plate. 1� Place vacuum cleaner in the low position by stepping on the foot pad and pulling back the handle twice� Then, turn the vacuum cleaner over, exposing the underside� 2�...
Fig� 1 Thermal fuse protection Your Fuller Brush vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector� This thermal protector is designed to protect your vacuum cleaner from overheating due to restricted airflow (i�e� clogged hose, oper- ating the vacuum without a bag)� Should this situation occur, the thermal fuse protector will safely shut off your vacuum cleaner to avoid any potential damage�...
• Change vacuum bags and filters as recommended to maintain optimum cleaning efficiency. • Always use genuine Fuller Brush vacuum bags, filters and parts as use of other products may result in poor cleaning or filtration performance� Fuller Brush filtration products are designed for maximum performance�...
Need help?
Do you have a question about the Tidy Maid FBTM-PW and is the answer not in the manual?
Questions and answers