Tools; Reset - Lindy Wireless LAN Router User Manual

Tools

This page enables user to restart the system, save and load different settings as
profiles, restore factory default settings, run a setup wizard to configure router
settings, upgrade the firmware, and ping remote IP addresses.

Reset

Click "Restart" to restart the system in the event the system is not performing
correctly.
Settings
This screen enables user to save settings as a profile and load profiles for different
circumstances. User can also load the factory default settings, and run a setup
wizard to configure the router and router interface.
Save Settings: Click "Save" to save the current configuration as a profile that can
load when necessary.
Load Settings: Click "Browse" and go to the location of a stored profile. Click
"Load" to load the profile' s settings.
Restore Factory Default Settings: Click "Restore" to restore the default settings.
All configuration changes will lose.
47
Firmware
This screen enables user to keep the router firmware up to date.
Please follow the below instructions:
Download the latest firmware from the manufacturer' s Web site, and save it to disk.
Click "Browse" and go to the location of the downloaded firmware file.
Select the file and click "Upgrade" to update the firmware to the latest release.
Ping Test
The ping test enables user to determine whether an IP address or host is present on
the Internet. Type the host name or IP address in the text box and click Ping.
48