User Manual of Digital Video Recorder
Figure 13. 6 Added User Listed in User Management Interface
5. Select the user from the list and then click the
in Figure 13. 7.
Figure 13. 7 User Permission Settings Interface
6. Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for
the user.
Local Configuration
•
Local Log Search: Searching and viewing logs and system information of DVR.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property),
upgrading system firmware, clearing I/O alarm output.
•
Local Shutdown Reboot: Shutting down or rebooting the DVR.
Remote Configuration
•
Remote Log Search: Remotely viewing logs that are saved on the DVR.
•
Remote Parameters Settings: Remotely configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
•
Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.
•
Remote Video Output Control: Sending remote button control signal.
•
Two-way Audio: Realizing two-way radio between the remote client and the DVR.
•
Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote client) and
controlling the alarm output.
•
Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting HDD
property), upgrading system firmware, clearing I/O alarm output.
•
Remote Shutdown/Reboot: Remotely shutting down or rebooting the DVR.
Camera Configuration
•
Remote Live View: Remotely viewing live video of the selected camera(s).
button to enter the Permission settings interface, as shown
186