Main/Aux Output Switching - HIKVISION DS-7104HGHI-SH User Manual

User Manual of Digital Video Recorder
The Add IP Camera is not supported by DS-7100-SH series DVR.

3.2.3 Main/Aux Output Switching

The DS-7100-SH, DS-7200-SH, and DS-7324/7332HGHI-SH models do not support Aux/Main output switch.
When the HDMI/VGA or HDMI1/VGA (DS-8124/8132HGHI-SH) output is configured as the main output, you
can perform the following operation to switch to CVBS or HDMI2 (DS-8124/8132HGHI-SH) output as the
main output.
Steps:
1. Use the mouse wheel to double-click on the HDMI (1)/VGA output screen, and the following message
box pops up:
2. Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel to
cancel the operation.
3. Select the Menu Output Mode to Main CVBS or HDMI2 from the right-click menu on the monitor.
4. On the pop-up message box, click Yes to restart the device to enable the CVBS output or HDMI2 as the
main output.
Figure 3. 1 Right-click Menu
DS-7200 Series
Figure 3. 2 Switch Main and Aux Output
45
DS-7300 and DS-8100 Series