Using Your Steam Pocket - Shark S3502UKJR Owner's Manual

Using Your Steam Pocket

IMPORTANT: Make sure you don't use the mop
without attaching a micro-fibre pocket and adding
water to the tank first. When you are using the
mop for the first time, it might take longer than the
normal 30 seconds to start steaming. Just pump
the handle a few times in a downward motion to
prime the pump and it should be ready.
1
NOTE: Make sure the floors are swept or
vacuumed before using the Steam Pocket
1
Pull and twist the quick release cord holder to
unwrap the power cord completely. A great time
saver!
Plug into a 220-240-volt electrical outlet
The power "On" light will turn blue, it takes
approximately 30 seconds for the mop to heat up
and the steam to be ready.
6 www.sharkclean.co.uk
S3502UKJR_S3502UKJW_IB_ENG_120510_3.indd 6
Mop
®
2
Pump the handle a few times in a downward
motion. This pumping action will release steam as
® Mop.
you mop and allows you to customize the amount
of steam you want. Begin mopping with a forward
and backward motion. The natural motion of
mopping will produce steam.
2
12-05-10 3:46 PM