8
4.0 FINISHING
4.1
ANDIRON AND GRATE ASSEMBLY
A.
With the 2 andirons laying face
down, secure the grate overtop
using two ¼-20 bolts (supplied in
the manual baggie).
B.
Install the grate/andiron assembly
to the burner base using four 1 ¼"
self tapping screws (supplied in the
manual baggie).
4.2
REMOTE INSTALLATION
A.
The remote must be installed onto the bracket on the back of the log set on the right side.
B.
Bend the tab on the remote bracket straight and then using the double sided tape supplied with the
remote, stick the remote to the bracket.
C.
Hook up the wires from the remote to the terminals on the walve marked TH/TP and TH.
W415-0472 / D / 11.24.10
USE ONLY ACCESSORIES
DESIGNED FOR AND
LISTED WITH YOUR
SPECIFIC LOG SET.
1
2