Throttle Lever - Kubota U17-3 Tier4 Operator's Manual

38
1. To lock the swing frame with the track
frame, engage the swing lock pin.
2. Adjust the engine speed from idling to
an intermediate speed.
3. Unlock the lock lever for attachment
control.
4. Raise the dozer and hold the bucket
about 8 to 16 in. (20 to 40 cm) over the
ground.
(A) 8 to 16 in. (20 to 40 cm)

Throttle Lever

At the operator's seat,
1. Move the throttle
"FAST" position, and the engine speed
increases.
2. To stop the engine, push the throttle
lever fully to the "SLOW" position and
turn the starter switch to the "STOP"
position.
(1)Throttle lever
lever to the
(A) "FAST"
(B) "SLOW"
Drive Levers (Right, Left)
WARNING
3
To avoid personal injury or death:
If the
been
dozer
operator, "behind" , then the
travel direction is opposite to
the drive direction of the levers
(when activating the drive lever
forwards, the excavator, seen
from the operator, will move
backwards).
Pushing the drive lever forward, moves the
excavator forward, and vice-versa. The front
of the excavator is the direction where the
dozer is present.
(1) Drive lever (left)
(2) Drive lever (right)
IMPORTANT:
If the track are clogged with sand or
gravel while working on soft ground, lift
up one track with the help of the boom,
arm and bucket and let the track rotate to
shake off the sand and gravel.
(A) "Rotate to shake off sand and gravel"
swing frame
turned 180º, i.e. the
is, seen from
(A) "Forward"
(B) "Backward"
has
the