Table of Contents
Advertisement
InsTallaTIon
SECTIONS
Table of Contents
Connection and Installation
Important: As the unit powers up it performs a self-test procedure. In
case the self- test has failed for any reason the product LED behavior
will be abnormal as described in User Guidance section. Try to
power cycle the unit. If problem persists please contact your system
administrator or Technical Support.
step 1 – Connecting the Console to the switch
warning: Before attempting to connect anything to the Switch or your
computers, please ensure that all computer equipment and devices are
powered off.
Connect your monitor, keyboard, mouse, and speaker to the rear of the
Switch in the "User Console" section.
Belkin
Advanced Secure DisplayPort KVM
®
1
2
3
step 2 – Power up
2.1 Turn the monitor on.
2.2 Power up the Belkin Advanced Secure DisplayPort K VM by
18
4
5
notes:
1.
Console USB keyboard and mouse ports are switchable, i.e.
you can connect keyboard to mouse port and vice versa.
However, for optimal operation it is recommended to connect
USB keyboard to console USB keyboard port and USB mouse to
console USB mouse port.
2.
For security reasons products do not support wireless keyboards.
In any case do not connect wireless keyboard to product.
3.
Non-standard keyboards, such as keyboards with integrated
USB hubs and other USB-integrated devices, may not be
fully supported due to security policy. If they are supported,
only classical keyboard (HID) operation will be functional. It is
recommended to use standard USB keyboards.
4.
Console USB mouse port supports Standard KVM Extender
composite device having a keyboard/mouse functions.
connecting the power. The display diagnostic LED should be solid
green a few seconds after power up. This indicates the display EDID
information has been captured and secured.
6
7
Hide quick links:
Advertisement
Table of Contents
