Installation Requirements; Hardware Installation - Ubiquiti airMAX AM-9M13 Quick Start Manual

airMAX AM-9M13 Quick Start Guide
™

Installation Requirements

• RocketM9 (sold separately)
• Two adjustable wrenches or a combination of two 19 mm,
one 14 mm, and one 13 mm wrenches
• One #2 Phillips screwdriver
• Shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through
the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks . For more details, visit www.ubnt.com/toughcable
™

Hardware Installation

1. Remove the Port Cover by lifting the release latch on the
bottom of the RocketM9 and sliding the Port Cover off.
2
Port Cover