Advertisement
MAINTENANCE
When handled properly, this unit is engineered to give you years of
satisfactory service. Here are a few product care instructions:
1. Do not immerse the unit in water. If the unit comes in contact
with water, dry it immediately with a soft lint-free cloth.
2. Do not clean the unit with abrasive or corrosive materials.
Abrasive cleaning agents may scratch the plastic parts and corrode
the electronic circuit.
3. Do not subject the unit to excessive: force, shock, dust,
temperature, or humidity. Such treatment may result in
malfunction, a shorter electronic life span, damaged batteries, or
distorted parts.
4. Do not tamper with the unit's internal components. Doing so
will terminate the unit's warranty and may cause damage. The
unit contains no user-serviceable parts.
5. Only use new batteries as specified in this instruction manual.
Do not mix new and old batteries as the old batteries may leak.
6. Read this instruction manual thoroughly before operating the unit.
SPECIFICATIONS
Operating temperature
Temperature measuring range : 0°C to 50°C (32°F to 122°F)
Temperature measuring range : -50°C to 70°C (-58°F to 158°F)
: 0°C to 50°C (32°F to 122°F)
(unit : indoor sensor)
(probe: outdoor sensor)
Temperature display resolution : 0.1°C ( 0.2°F)
Temperature sampling cycle
Power source
Weight
Size
- The content of this manual is subject to change without further
notice.
- Due to printing limitation, the displays shown in this manual
may differ from the actual display.
- The contents of this manual may not be reproduced without
the permission of the manufacturer.
- Technical features are subject to canghe without furter notice
5
(unit : indoor sensor and probe:
outdoor sensor)
: 10 seconds
(unit: indoor sensor and probe:
outdoor sensor)
: Uses 1 piece UM4 or 'AAA' size
battery (not included)
: 135 gms (without battery)
: 117X 107 X 21mm ( H X W XD)
CAUTION
Advertisement
