Free Standing Or Wall Mounting; Maintenance - Oregon Scientific NTS-912 User Manual

NOTE Locate the outdoor sensor probe away from the
direct sunlight and heavy precipitation.

FREE STANDING OR WALL MOUNTING

Stand
Flip out the plastic stand on the rear of the Thermometer for
table standing. Stand the thermometer on a flat surface.
Wall Mount
You can mount your Thermometer on a wall by using a screw
(not supplied) with the screw head extending about 3.5mm
(0.14 in) from the wall.
NOTE For accurate measurement, you should mount the
Thermometer in an area where air can flow freely around it.
7
NTS912manual-E

MAINTENANCE

The following suggestions will help you care for the
Thermometer so you can enjoy it for years.
1. Keep the Thermometer dry. If it gets wet, wipe it dry
immediately. Liquids might contain minerals that can
corrode the electric circuits.
2. Use and store the Thermometer only in normal
temperature environments. Temperature extremes can
shorten the life of electronic devices, damage the battery,
and distort or melt plastic parts.
3. Handle the Thermometer gently and carefully.
Dropping it can damage circuit boards and cause the
Thermometer to work improperly.
4. Keep the Thermometer away from dust and dirt, which
can cause premature wear of parts.
5. Wipe the Thermometer with a damp cloth occasionally
to keep it looking new. Do not use harsh chemical,
cleaning solvents, or strong detergents to clean the
Thermometer.
6. Use only fresh batteries of the required size and type.
Always remove old or weak batteries. They can leak
chemicals that can destroy electronic circuits.
7. Modifying or tampering with the Thermometer's internal
components can cause a malfunction and might invalidate
its warranty.
7
04/12/15, 5:39 PM