08
Maintenance
There are no special requirements for any
maintenance within a five year period. The
unit is easy to clean by simply removing the
lid and motor plate. After carrying out work,
make sure all the screws are in place.
1. Remove 4 screws on top of the lid.
2. Remove 4 screws on top of motor plate.
Pull backwards from the spigot and then
lift up. Motor mounting remains attached
to the main case via cabling.
3. After maintenance replace all components
and fixing screws.
13
Cleaning
Isolate the unit from electrical mains
supply before removing any cover, or
servicing the unit.
SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
Need help?
Do you have a question about the MEV SPIDER and is the answer not in the manual?