Table of Contents
Advertisement
P
LEASE
P
1
LEASE
1.4
SERVICE
HOTLINE
E-MAIL
1.5
STANDARDS, REGULATIONS
AND LICENCE
1
LICENCE
Monitoring System
Rack Monitoring System
N
OTE
N
OTE
In the event of malfunction, please first follow the instructions in the
relevant section (> 5). For all other questions, please do not hesitate to
contact LINDY technical support.
support@lindy.com
• To receive a speedy reply, please provide the following information:
– Device type
– Serial number
– Software version
– Configuration file
– Description of problem
• Please also leave your telephone number.
You will receive a qualified reply by e-mail or telephone.
The LINDY RMS has been built and tested in accordance with the rele-
vant guidelines. In connection with installation in a terminal (for exam-
ple, a rack), the additional requirements in accordance with IEC 950
must be observed and complied with.
The RMS conforms to the safety requirements of the EU Directive on
electromagnetic compatibility (EMC) (89/33/EEC) and the low voltage
Directive (73/23/EEC).
Below is a list of the standards and regulations on which the RMS is
based:
EN 55 022/Class B
EN 60 950 (IEC 950)
EN 61 000-4-2
EN 61 000-4-3
All LINUX source codes which were used to produce the product and
are subject to the GPL (see GNU Public Licence ä A4 ) can be obtained
for a service charge. This does not include the source codes of the RMS
software itself. However, the LINUX sources are freely available, for
example at URL: "http://metalab.unc.edu/pub/Linux".
DE:
0621 / 47 005 - 0
UK:
01642 754040
IT:
031 48 40 11
FR:
0 825 825 111
CH:
061 335 97 00
USA:
(256) 771-0660
Australia:
07 3262 9033
7
Advertisement
Table of Contents
