Table of Contents
Advertisement
T
ECHNICAL
2
T
ECHNICAL
Door Contact
Chipcard reader
Infrared room surveillance
Extension cable
Water sensor
Mains Power Strips
Note
D
ESCRIPTION
D
ESCRIPTION
Monitors access using a magnetic bridge
sensor which responds to
any magnetic material (no contact
required).
– Also for monitoring side panels
or cover
– Cable length: 4 m
– Maximum cable length: 20 m
– With mounting hardware
The chipcard reader is integrated in
the door frame of the server cabinet.
– It reads chipcards.
– It controls an electrical door
opener using DIGITAL OUT 4 if the
card is valid.
– It is connected to the AUX serial
interface.
Detects movements in the
surveillance area.
– Adjustable sensitivity
– Sabotage protection
– Cable length: 4 m
– Maximum cable length: 20 m
– With mounting hardware
– RJ11 cable for temperature or
humidity sensors
Length: 5 m; 10 m; 15 m; 20 m
– 4-core sensor cable (for all other
sensors)
Length: 5 m; 10 m; 15 m; 20 m
Watersensor to detect
floods / water
Switchable mains power strips can be managed
by the RMS
– by RS-232 (IP versions
also available)
– 4 out / 1 in (19" 1U)
– 8 out / 2 in (redundant
power supply support)
Other sensors can be connected to DIGITAL IN, ALERT IN or UPS IN
according to the requirements in 3.3.1.
Rack
Advertisement
Table of Contents
