Locating Heater For Use - Napoleon PTH-103-3G Installation, Operation And Maintenance Instructions

BE CAREFUL: When certain materials or items are left under this heater, while in use, they will be
subjected to radiant heat and could be seriously damaged.
● The heater is primarily for heating of outdoor patios, decks, spas, pool and working areas.
● Always ensure that adequate fresh air ventilation is provided. Follow the spacing tolerances in Figure 1.
● The minimum clearances to combustible construction shown in Figure 1 must be maintained at all times
● The installation must conform to local codes or in the absence of local codes with the standard for the
storage and handling of liquid petroleum gases:
In the US use : ANSI/NFPA58 on National Fuel Gas Code ANSI Z223-1998
In Canada use: National Standards of Canada. CAN/CGA B149.1 & 2-M86
● The heater must be placed on level firm ground.
● Never operate in an explosive atmosphere. Keep away from areas where gasoline or other flammable
liquids or vapors are stored or used.
CAUTION
During strong and windy weather, turn off the
heater and the gas cylinder valve. Remove
the heater reflector hood then move the heater
to a sheltered location. Cautions do not move
heater while it is still hot.
LOCATION HEATER FOR USE
Figure 1.
CELING / OVERHANG
36"
Page 11
36
"