Panasonic NV-GS320 Operating Instructions Manual page 54

≥It is required to use the driver for which
[Microsoft] is displayed on [Driver Provider]
in [Driver] tab.
1
Select [start] >> [Settings] >> [Control
Panel] to start [System].
≥[System Properties] is displayed.
2
Click [Hardware] tab and then click [Device
Manager].
3
Right-click [Enhanced Host Controller] etc.
in [Device Manager] and then select
[Properties].
≥The indication [Enhanced Host Controller] is
changed as [EHCI] depending on the host
controller you use.
4
Click [Driver] tab to check the description
on [Driver Provider].
≥If [Microsoft] is displayed on [Driver Provider],
the confirmation procedure is completed.
If a description other than [Microsoft] is
displayed
≥Update the driver with the following procedure.
1
Click [Update Driver...].
54
VQT1A47
With a PC
2
Check [Install from a list or specific location
(Advanced)] and then click [Next].
≥When your OS is Windows 2000, click [Next]
after [Update Device Driver Wizard] appears.
3
(When your OS is Windows XP)
Check [Don't search. I will choose the driver
to install] and then click [Next].
(When your OS is Windows 2000)
Check [Display a list of the known drivers
for this device so that I can choose a
specific driver] and then click [Next].
4
Click [Standard Universal PCI to USB Host
Controller] and then click [Next].
5
Click [Finish].
≥The update of the driver is completed.
Connect the movie camera.