Standby And Resume Problems; Wireless Problems - HP omnibook OBXT1500 Reference Manual

If the notebook won't boot from the floppy disk drive
• Make sure the drive is connected correctly—see "To connect a USB floppy disk
drive" on page 83.
• Make sure the floppy disk drive is selected as the boot device—see "To change the
boot device" on page 30.
If the notebook takes a long time to resume
• The notebook can routinely take a minute or more to resume if it has a network card
installed. While the operating system is loading drivers and checking hardware and
network connections, you will see a blinking cursor on your display. As soon as the
hardware has been re-initialized, the Windows desktop will appear.

Standby and resume problems

If the notebook takes a long time to resume after being on standby
• The notebook can take a minute or longer to resume if a network card is installed.
A blinking cursor appears on the display while the system is loading and checking
hardware and network connections. As soon as the hardware is reinitialized, the
Windows desktop appears.
If you have general problems resuming from standby or hibernation
• Close all applications before going on standby or into hibernation.
• If the problems appeared after you installed new software (including drivers, such as
printer drivers), uninstall the software. Contact the software application or device
vendor for additional support.

Wireless Problems

If you have problems with wireless communication
• Make sure the wireless indicator light is on.
• See "LAN problems" on page 106.
Troubleshooting and Maintenance
Getting Assistance for Your Notebook
Reference Guide 117