Table of Contents
Advertisement
x [Bluetooth AUDIO - AAC]
You can enable and disable AAC audio.
[On]: AAC audio if the BLUETOOTH
device supports AAC.
[Off]: SBC audio.
Note
You can enjoy high quality sound if the AAC is
enabled. In case you cannot listen to AAC sound
from your device, select [Off].
x [Bluetooth Power Setting]
[On]: The Bluetooth power is turned on.
A paired BLUETOOTH device can always
connect to the main unit.
[Off]: The BLUETOOTH power is only
turned on when "BT" function is selected.
Note
In some applications, you may not be able to
make the connection directly from the
BLUETOOTH device even though you have set
[Bluetooth Power Setting] to [On]. In this case,
press BLUETOOTH.
[Network Settings]
x [Wireless Network Settings]
Connect the system to the network
beforehand using the built-in wireless LAN
of the system for wireless network
connection. For details, see "Step 3:
Preparing for Network Connection"
(page 20).
Tip
For further details, visit the following website and
check the FAQ:
http://www.sony-asia.com/section/support
42
GB
x [Network Connection Status]
Displays the current network connection
status.
x [Auto Renderer Access
Permission]
[On]: Allows automatic access from a
newly detected controller.
[Off]: Off.
x [Renderer Access Control]
Sets whether or not to accept commands
from controllers.
x [Remote Start]
[On]: Allows turning on the system by a
device linked via network when the system
is in standby mode.
[Off]: The system cannot be turned on by a
device linked via network.
[Resetting]
x [Reset to Factory Default Settings]
You can reset the system settings to the
factory default by selecting the group of
settings. All the settings within the group
will be reset.
x [Initialise Personal Information]
You can erase your personal information
stored in the system.
Hide quick links:
Advertisement
Table of Contents
