Hydraulic Test Fitting Kit; Measuring Container - Toro Groundsmaster 4000-D Service Manual

Hydraulic Test Fitting Kit

This kit includes a variety of O--ring Face Seal fittings to
enable you to connect test gauges into the system.
The kit includes: tee's, unions, reducers, plugs, caps
and male test fittings.
Toro Part Number: TOR4079

Measuring Container

Use this container for doing hydraulic motor efficiency
testing (motors with case drain lines only). Measure effi-
ciency of a hydraulic motor by restricting the outlet flow
from the motor and measuring leakage from the case
drain line while the motor is pressurized by the hydraulic
system.
The table in Figure 20 provides gallons per minute
(GPM) conversion for measured milliliter or ounce motor
case drain leakage.
Toro Part Number: TOR4077
Groundsmaster 4000--D
TORO TEST FITTING KIT (NO. TOR4079)
Page 4 - - 27
Figure 18
Figure 19
Figure 20
Hydraulic System