Table of Contents
Advertisement
IT- 8000 Series Installation Guide
---------------------------------------------------------------------------------------------------------------------------------------------
A5.
Locate the three bolts already partially inserted along the top of the left armrest.
A6.
Align these three bolts to the three holes on the base of the left armrest.
Tighten these screws, working from the back first, then progressing up to the front.
A7.
Align the two air connectors on the bottom of the left armrest to their corresponding slots
on the left side of the chair. Insert, then be sure to push the excess air hose slack
A8.
Check to confirm that the armrests are well-assembled. Then rotate the screw 90º
clock-wise.
into the base. This is CRITICAL
to prevent air line kinking and
the chairs proper function.
==
USJ-9000
down
Advertisement
Table of Contents
Need help?
Do you have a question about the IT- 8000 Series and is the answer not in the manual?
Questions and answers
My Infinity I-8000 is alarming continuously when going into zero gravity position. When pushing the recline button the feet come up and the chair alarms continuously. Likewise pushing the back up brings the feet up instead. All other functions appear to perform properly.