ViewSonic ViewPanel VE800 User Manual page 9

Do the following to adjust the screen image:
To display the Main Menu, press button [1].
1
NOTE: All OnView menus and adjustment screens disappear automatically
after about 30 seconds. This time period is adjustable through the Setup menu
and the OSD timeout control described on page 11.
To highlight a control you want to adjust, press
2
the Main Menu.
To select the highlighted control, press button [2]. A control screen appears
3
like the example shown below.
The M down
arrow decreases
Contrast, L up
arrow increases
Contrast.
To adjust the control, press the up
4
To save the adjustments and exit the menu, press button [1] twice.
5
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1280 x
1024 @ 60 Hz to the ViewPanel display. (Look for instructions on "changing
the refresh rate" in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated "active area" of the
ViewPanel display.)
®
L
or
L M
or down buttons.
ViewSonic
M
to scroll up or down
The line at the
bottom of the screen
tells you what you
can do next: select
the Brightness
control or Exit.
VE800 8