Quick Installation - ViewSonic ViewPanel VE800 User Manual

Quick Installation

Optional: For instructions on wall mounting,
see page 5 of this user guide.
1 Connect power cord
2 Connect video cable
• Make sure both the ViewPanel
and computer are turned OFF
• Remove rear panel covers if necessary
• Connect the video cable from the
ViewPanel to the computer
Macintosh users: Models older than G3
require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic
contact ViewSonic Customer Support.
3 Turn ON ViewPanel display and
computer
• Turn ON the ViewPanel display, then
turn ON the computer. This sequence
(ViewPanel display before computer)
is important
NOTE: Windows users may receive a
message asking them to install the INF file.
This is on the CD.
4 Insert the ViewSonic Wizard CD
into the computer's CD drive
• Follow the on-screen instructions
®
display
®
Macintosh adapter,
If your computer does not have a CD-ROM
drive, see "Customer Support."
(1) Wait for the CD-ROM to auto-start.
NOTE: If the CD-ROM does not auto-start:
double-click on the CD-ROM icon in the
Windows Explorer, then double-click on
viewsonic.exe.
(2) Follow the on-screen instructions.
5 Windows users: Set the timing
mode (resolution and refresh
rate)
Example: 1280 x 1024 @ 60 Hz.
For instructions on changing the resolution
and refresh rate, see the graphic card's user
guide.