HP x360 310 G1 PC Maintenance And Service Manual page 68

NOTE: When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
WLAN module (see
●
Memory module (see
●
Solid-state drive (see
●
Heat sink (see
●
Fan (see
Remove the system board:
1. Disconnect the following cables from the system board:
(1): Power connector cable
(2): Wireless antennas (may include one or two antennas)
(3): Keyboard cable
(4): Webcam cable
(5): Display cable
(6): Power button board cable
(7): Fan cable
(8): Speaker cable
(9): Touchpad board cable
(10): Hard drive cable
2. Remove the four Phillips PM2.0×3.0 screws (1) that secure the system board to the computer.
60 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
WLAN module on page
Memory module on page
Solid-state drive (M.2) on page
Heat sink on page 46)
Fan on page 45)
32)
41)
34)