Battery - HP x360 310 G1 PC Maintenance And Service Manual

Battery

Description
2-cell, 29-Wh, 3.82-Ah, Li-ion battery
3-cell, 43-Wh, 3.82-Ah, Li-ion battery
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
Remove the battery:
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
1. Disconnect the battery cable from the system board (1).
2. Remove the four Phillips PM2.0×7.0 screws (2) that secure the battery to the computer.
3. Remove the battery (3).
Reverse this procedure to install the battery.
Bottom cover on page
To reduce potential safety issues, use only the battery provided with the computer, a
28).
Component replacement procedures
Spare part number
751875-005
778956-005
49