5. Fasten the chest clip.
5
6. Pull up on each shoulder strap to
6
7. Tighten the harness by pulling
7
8. The harness is tight enough
8
16
tighten the lower section of the
harness.
the Genius Adjust harness
tightening strap straight out
through the adjuster slot until the
harness straps are tight.
when you cannot pinch a loop of
webbing.
Section 5: Choosing a Seating
Location in Your Vehicle
Forward-Facing vehicle seats must ALWAYS be used
with this child restraint. If your vehicle does not have
rear seats, consult your vehicle owner's manual to help
identify safety features in your vehicle or contact the
vehicle manufacturer.
Do NOT install this child restraint into any of the following
types of seating positions:
• NEVER install on a rear-facing
vehicle seat.
• NEVER install in the rear seat of
small extended cab pickup.
• NEVER install on a side-facing
vehicle seat.
If the vehicle backrest angle is adjustable, adjust vehicle's
backrest into the upright position. Be sure this area is flat
and clear of objects that might get in the way of installing
the child restraint.
17
Need help?
Do you have a question about the Performance Crossover and is the answer not in the manual?
Questions and answers