Audio Only; Digital Noise Reduction; Output Select; Color System - Sharp LC-46D43U Aquos Operation Manual

Useful adjustment settings
Perform the following steps to set the Option menu
items on this page.
Allows you to select what controls the audio output.
EXIT _ . . .,
o
0
- FAVORITE CH -
0®@@
Press MENU to display the MENU screen, and
then press ....
/~
to select "Option".
Fixed
Variable
• Sound via speaker is adjusted with
VOL
+
1- on the remote control
unit or VOL
-I
+
on the W.
• Sound via the AUDIO OUTPUT
terminal is not adjustable and
outputs at a consistent level.
• Sound via the AUDIO OUTPUT
terminal is adjusted with VOL
+
I-
on the remote control unit or VOL
-1+ on the W.
• Sound via speaker is muted.
Press
./~
to select a specific adjustment
item, and then press ENTER.
Press
./~
(or ....
/~)
to select the desired
setting, and then press ENTER.
Press MENU to exit.
• Skip this step for "Audio Only".
Select the video signal system compatible with your
equipment from the list below;
- Auto
- NTSC
- PAL-M
- PAL-N
"Program Info." does not display
"Program Info." displays
No
Yes
Select the CH display when changing channels for
digital broadcasting.
• "Color System" can only be set for the INPUT 1 VIDEO,
INPUT 2 VIDEO and INPUT 3.
• If you already set the Secret No., input the 4-digit secret
number here. See page 40 for setting a secret number.
Both screen images and audio are output.
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed.
When listening to music from a music program, you
can set the screen off and enjoy audio only.
Produces a clearer video image.
Off No adjustment
High
For enhanced Digital Noise Reduction
Low For moderate Digital Noise Reduction
(@-
36