Sharp LC-46D43U Aquos Operation Manual page 15

Preparation
You can use the INPUT 4 or INPUT 5 terminal when connecting HOMI equipment.
Hom.
HoMI cable
~
dOmp,__
(_co_m_m_e_rc_ia_lly_a_Va_il_ab_le_)_
HDMI equipment
-
• When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5.
• When receiving an incompatible signal, such as 1080p, the message below appears without the image on the screen.
For an incompatible video signal: "An incompatible video signal has been received. Check the output device settings."
For an incompatible audio signal: "An incompatible audio signal has been received. Check the output device settings."
When connecting to a PC with an analog RGB terminal. (INPUT 6)
PC
RGB cable
(commercially available)
o
3.5 mm stereo minijack
cable (commercially available)
When connecting to a PC with an HDMI terminal. (INPUT 4 or 5)
Hom.
HoMI cable
ID
d
Om~pi
__
(c_o_m_m_er_c_ial_ly_aV_a_ila_b_le_)-
PC
-
• The HDMI terminals only support digital signal.
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 37 to set PC input signals.
PC Resolution Horizontal Frequency Vertical Frequency VESA Standard
720 x 400 31.5 kHz 70 Hz - -
31.5 kHz 60 Hz 0
VGA
640 x 480 37.9 kHz 72 Hz 0
37.5 kHz 75 Hz 0
35.1 kHz 56 Hz 0
SVGA 800 x 600
37.9 kHz 60 Hz 0
PC 48.1 kHz 72 Hz 0
46.9 kHz 75 Hz 0
48.4 kHz 60 Hz 0
XGA 1024 x 768 56.5 kHz 70 Hz
0
60.0 kHz 75 Hz
0
WXGA 1360 x 768 47.7 kHz
60 Hz 0
DOC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Co., Inc.
@)-
14